Custom Balloon Designs-Twister Instructions for balloon animals,models and sculptures

	Start with a white 260 make a 1 inch bubble then a split pinch twist. Then make another 1 inch bubble and wrap nozzle around twist.
	Blow up a pink/grey 260 start off with a pinch twist and twist to white split.
	Twist in under white bubbles. twist a bubble in each balloon, make the pink bubble slightly larger than white. twist both balloons together.
	Twist the white back down to the 3 bubble cluster.Do a pair of largish lock twists with the pink for ears.
	Then twist pink back down so the 2 pink bubbles sit behind the 2 white bubbles.
	This is how it should look from the front. Notice the nose is positioned over the white split but the other bubble is under the 2 white bubbles.The sequence of moves above should also leave you with a four bubble roll of two pink and two white. The white are at the front, the pink are at the back and 2 large pink lock twists at the top form the ears.
	The pink is broken off and tied. the body is a standard dog's body with longer legs. The front legs are tucked inside the back legs so he sits as so.
	Draw on eyes and whiskers.